How Much Does It Cost To Automate A Gate?

0
94
automated gate contractor

A gate automation system costs about $5,000. A gate automation system can be installed by a competent handyman with specific skills in the field ow with the help of an automated gate contractor. The cost of installation will depend on the complexity of your gate and surrounding area, which includes whether or not you have to remove trees or move rocks for the gates to work properly.

 

Gate automation systems can be installed in single or multiple gates. You can save money if you install them in several gates at once. A gate automation system for one gate costs $5,000 to $6,500. For two gates under 200 feet in length, the cost ranges from $6,500 to $7,000. Each additional gate will cost approximately $800 to $1,200 more than the previous gate. This additional expense is due to the fact that the controls must be separately mounted for each gate and connected using wires and cables.

 

There are several different automation systems available. We will examine them for this article. However, you should speak with a technician to find out which system is best for your needs.

 

Remote control systems are the least expensive gate automation option. However, they also have a number of disadvantages. First of all, a remote control gate system requires considerable human interaction because you will have to manually open and close the gate. Also, this type of automation does not allow for security. It can be easily breached by anyone who has access to the remote control unit. Finally, there are interruptions in service due to dead batteries or power outages. For help, you can always consult an automated gate contractor. 

 

Accelerometers are automatic systems that use sensors to detect when an object approaches the gate. These sensors send a signal to a gate opener, which then opens the gate on command. Accelerometers are available as standalone units or integrated into automated gates. Accelerometers range from $1,900 to $4,000.

 

Solenoid operated gates open and close on command using a solenoid actuator that vibrates a lever. The solenoid needs to be re-set periodically by replacing small plastic parts. Solenoid-operated gates cost approximately $2,100 for one gate and approximately $3,000 for two or more gates under 200 feet in length. In general solenoid-operated gates require some degree of human interaction because the operator has to make sure the gate is properly closed after its use. Also, the gates are not truly security-operated due to the fact that someone can open or close them at will.

 

Magnetic shift systems are very similar to solenoid-operated gates in that they use a solenoid actuator. However, they differ because all of the parts are magnetic. The actuator itself is a coil of wire surrounding an electromagnet. When current is passed through this coil, the magnet attracts the solenoid lever so it can move. These systems cost $3,500 for one gate under 200 feet in length and $4,000 for two or more gates under 200 feet in length. Magnetic hinge systems do require some degree of human interaction because the magnetic coil has to be reset periodically. However, they are not as susceptible to a vandal with a screwdriver. Finally, they are more secure than a simple electric gate with a solenoid actuator because they cannot be opened unless the magnet is touched. For help, you can always consult an automated gate contractor. 

 

Cams have been around for several decades and have proved themselves to be very reliable and secure gate automation systems. They have been installed in various applications over the years ranging from residences to governmental institutions such as schools and hospitals. These gates can open automatically when a sensor detects that an object is within a certain distance from the opening side of the gate. Now that this technology is available to the public, it is also possible to install these gates in your residence. Cams are available as standalone units or integrated into automated gates.

 

Cams are operated by a solenoid actuator. They are the least expensive options which cost around $2,100 for one gate under 200 feet in length and $3,000 for two or more gates under 200 feet in length. There are no action items you will have to perform on this automated gate system. The operator can simply walk up to the gate and open or close it by pressing a button on the remote control unit. Cams do require a degree of human interaction because the operator has to make sure the gate is properly closed after its use.

 

Slow closing gates have a lever that is pressed down to close the gate. The gate operator can program this lever to close at different speeds. Slow closing gates are available as standalone units or as integrated into automated gates. They cost approximately $3,500 for one gate under 200 feet in length and $4,000 for two or more gates under 200 feet in length. They require a degree of human interaction because the operator has to press down on the slow closing lever and open or close it accordingly.

 

Spring-loaded gate automation systems are the most expensive gate automation systems. Like slow-closing gates, they have a lever that needs to be pressed to open or close the gate. However, the spring-operated gates also have a powerful return spring. This type of automated gate contractor will return to its normal position when it is opened. Many spring-operated automated gates also come with a backup battery system that allows them to operate for a short period of time when there is a power outage or if the battery dies after prolonged use. These types of automated gates are available as standalone units or integrated into automated gates.

Conclusion

If you are wondering which gate automation system is right for your needs? This depends on a number of factors. Let’s go over a few of these. First of all, do you want a gate that operates independently or do you want a gate that operates with another machine such as your garage door opener? A standalone gate automation system might be more appropriate for gates with higher traffic. Standalone automated gates are better suited for large vehicles because they will form an indestructible barrier between vehicles and pedestrians. In addition, they can be programmed to open or close at certain intervals, which can save energy. For help, with it, you can get in touch with automated gate installation services from Bellevue Fencing and get the best help from them for the same. 

 

LEAVE A REPLY

Please enter your comment!
Please enter your name here